SoftLab-NSK SoftLab-NSK on Facebook
Products Where to buy Download Support Forum About News Russian English
Forward T Site map

FD322 board

FD322 board - the SoftLab-NSK PCI-Ex1 Analog cardThe FD322 board is similar to FD300 board (input / output of analog video with sound) but it differs in details. In 2012 the PCI FD300 board was out of production and replaced by new PCI Express Analog board named FD322.

The FD322 Board Specification

Bus PCI Express x1
Video format PAL, PAL+, SECAM (input only): 720x576, 25 fps, 4:3/16:9
NTSC: 720x480, 29.97 fps, 4:3
Internal video data processing YUV 4:2:2 or YUV with transparency 4:2:2:4, 8-bit per component
Video inputs Two independent video channels with connection:
  • up to 9 composite sources
  • up to 4 S-Video sources
  • up to 3 YUV sources
  • up to 2 RGB sources
Two channels of time-base correction (TBC)
Video outputs

Two video outputs. Supported modes:

  • the same signal to both outputs
  • two independent video channels
  • Fill + Key (used for external titles mixing)

Possible combinations for each output:

  • Y/C + CVBS
  • YUV
  • RGB
Video synchronization Video output genlock to one of the video inputs
Audio inputs 4 mono or 2 stereo (balance)
Audio outputs 4 mono or 2 stereo (balance)
Audio format Uncompressed (PCM), 16 bit, 48 KHz
Audio delay Configurable audio delay (independent for each input channel)
Audio synchronization Synchronizing audio to the video signal
Sound level
  • 0 dBV linear RCA (cable)
  • +4 dBu balance XLR (breakout box TF790)
Supported OS Windows XP SP2/SP3 (32-bit),
Windows 7 (32-bit), Windows 7 (64-bit)

 Attention: The FD322 board doesn`t support SDI signals, the addtional Analog-SDI convertor is required to work both with Analog and SDI signals. The Analog-SDI convertor is purchased separately. If you only need to use SDI-signals, please order the product based on the FD422 board or on the FD842 board.