FD788 board

SDI/ASI. 8 in/out

3G/UltraHD/HD/SD SDI, ASI multi-channel I/O board.

8 HD-BNC connectors, each of which can function as an input or output depending on the configuration specified by the user. Connector for analog sync signal (Black Burst, Tri-level sync).
Mixed mode operation: SD SDI + HD SDI, SDI + ASI, etc. There is a Fill + Key mode for external mixing.

Low profile PCI-Express x4 card. Drivers for Windows and Linux.

The FD788 Board Specification

BusPCI Express x4 (2.0)
Inputs and outputs1 x HD-BNC input for connecting an external analog sync source (Black Burst, Tri-level sync)
8 x HD-BNC connectors – any one can be used as input or output for connecting SDI/ASI signals. The configuration is defined by the user.
The HD-BNC-> BNC adapters for connection input and output signals to board are included.
Signal formatsSD-SDI: SMPTE 259M
HD-SDI: SMPTE 292M, SMPTE 274M, SMPTE 296M
3G-SDI: SMPTE ST 424, SMPTE ST 425-1
UHDTV: Quad-link 3G-SDI SMPTE ST 425-5 (4SI)
UHDTV: Dual-link 3G-SDI SMPTE ST 425-4 (2SI)
ASI (EN50083-9) Bit rate 0..213 Mbps
Internal video data processing4:2:2 8, 10 bit
Supported video480i 59.94
576i 50
720p 23.98/24/25/29.97/30/50/59.94/60
1080i 50/59.94/60
1080p: 23.98/24/25/29.97/30/50/59.94/60
2160p: 23,98/24/25/29,97/30/50/59.94/60
ModesUp to 8 channels in SD / HD-SDI or ASI modes
Up to 4 channels in 3G-SDI mode
1 channel in Ultra HD-SDI mode 2160p: 50/59.94/60 (Quad-link)
2 channels in Ultra HD-SDI mode 2160p: 23.98/24/25/29.97/30 (Dual-link)
Mixed SD-SDI + HD-SDI modes
Mixed ASI + SDI modes
Supported OSWindows – Direct Show, SoftLab-NSK SDK
Linux – Video for Linux (V4L2)
AudioUp to 16 mono channel per input/configurable audio delay
SynchronizationFrom external analog sync source (Black Burst, Tri-level sync)
From the first two inputs of the board
From NTP network time servers
Software synchronization from another boards of the same type in the same PC
DirectShow Capture filtersAre part of the driver package
Power usage10 W
Sizelow-profile, 135х55 mm
Request more information about the board.

FDEXT BOARDS FOR OPERATION WITH OTHER TYPES OF SIGNALS:

– FD322 – 2 ANALOG IN & 2 ANALOG OUT;
– FD722 – SDI: SD/HD/3G; ASI. 2 IN & 2 OUT;
– FD922 – SDI: SD/HD/3G/UltraHD/12G; ASI. 2 IN & 2 OUT;
– FD720 – HDMI. 2 IN;
– FD940 – HDMI. 4 IN;
FD2110 – 2 x 25G Ethernet. 2 x SDI/ASI.

Purchase

To purchase a board, please contact the Sales department of SoftLab-NSK or our official dealers.

You can also take the board for testing.